Visit Open-E website
Results 1 to 10 of 10

Thread: Adding drives

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Adding a new drive

    Hi,

    I'm planning to add a new drive to the 3ware array and I just found this post when looking if it was possible from the DSS side.

    Just to make sure please tell me if this is possible.

    I currently have 3 unit array in the 3ware and one volume shown on the DSS.
    Now I want to add a 4th unit to the existing volume. From the 3ware side it looks like it is
    just a matter of swaping in a new drive and adding it to the existing volume.

    Now my question is: Will that extra space be available on the existing volume seen by DSS, or will it show up as a new separate volume?

    Can I easily expand the existing volume without loosing any data?

    King Regards

  2. #2

    Lightbulb

    I think you can do this, but DEFINITELY backup your data beforehand! We had a customer that almost lost all their data this way.

  3. #3

    Default Thanks

    Yes! I'll backup every volume into tapes just in case Mr Murphy decides to pay a visit.

    I just wanted to know if it was a task that I should schedule for the weekend or if a single night would do.

    From what I see from the previous posts a single night maintenance will do, but I wellcome more opinions/experiences.

    Thanks!

  4. #4

    Default

    Hi HangaS

    The part that will take the longest will be the data migration when adding the new drive.
    I cannot tell you exactley how long it will take, it will depend on the size of the drive.

    you should add the new disk in this order
    add the new disk to the array with your 3ware utility
    (the data migration will take a long time, go Have dinner)
    then use the PVresize utility in ctrl-alt-x
    then the disk should be good to go.

    I think you may need to reboot after the pvresize

    I've done it a couple of times without data loss

    good luck

  5. #5

    Default

    Hi,

    Thanks I already did it.
    The migration took a very long time indeed. a couple of days for a 1TB Hitachi drive.

    The only thing I was not expecting was that NSS reseted all my connections. And some NFS shares did not came back ok. :S

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •