Visit Open-E website
Results 1 to 10 of 10

Thread: Adding drives

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 03-15-2009, 05:06 PM #1
    dirtdart
    dirtdart is offline Member
    Join Date
    Feb 2009
    Posts
    9

    Default Adding drives

    I recently added two drives to my iSCSI server. They showed up in the 3ware configuration and I was able to import them into the array. After the array rebuilt, I rebooted the server and the open-E iSCSI OS shows the correct capacity (3.41 TB) in the volume group. However, the new add new volume tool shows that I onlyl have 5 GB free. The total used capacity of all of the existing volumes is only 1.4 TB, so I'm wondering where the rest of my drive capacity has gone and how I can make it available for use.
    Reply With Quote Reply With Quote
  2. 03-16-2009, 01:44 AM #2
    To-M's Avatar
    To-M
    To-M is offline Administrator
    Join Date
    Jun 2006
    Posts
    3,073

    Default

    Try to restart the server again - cant remember but I remember that someone did 2 re-boots and got it to work and not sure if the 3Ware was finishing the expansion.

    Also do a rescan from the Volume Manager. Any errors from the 3Ware side ? Check the 3Ware logs and also any errors from our side that we might be able to see anything from our end.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube
    Reply With Quote Reply With Quote
  3. 03-16-2009, 12:19 PM #3
    dirtdart
    dirtdart is offline Member
    Join Date
    Feb 2009
    Posts
    9

    Default

    After a restart and a rescan, I've still got the same results. There are no errors on the 3ware side and the array is fully expanded with a status of OK. If there are any errors on the iSCSI side, I don't know where to find them as the event viewer in the lower left isn't showing anything.
    Reply With Quote Reply With Quote
  4. 03-16-2009, 03:04 PM #4
    To-M's Avatar
    To-M
    To-M is offline Administrator
    Join Date
    Jun 2006
    Posts
    3,073

    Default

    Ok, try the PV Resize tool in the Extended Tools from console - Enter CTRL + ALT + X then select the PV Resize option and see if you see new volume. If not then send the logs to support@open-e.com and we mya need to you to enable the Remote Support option to have our engineers look into this.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube
    Reply With Quote Reply With Quote
  5. 03-16-2009, 05:48 PM #5
    dirtdart
    dirtdart is offline Member
    Join Date
    Feb 2009
    Posts
    9

    Default

    The PV resize did the trick. Thanks for the help.
    Reply With Quote Reply With Quote
  6. 05-08-2009, 05:09 PM #6
    HangaS
    HangaS is offline Member
    Join Date
    Jun 2008
    Posts
    40

    Default Adding a new drive

    Hi,

    I'm planning to add a new drive to the 3ware array and I just found this post when looking if it was possible from the DSS side.

    Just to make sure please tell me if this is possible.

    I currently have 3 unit array in the 3ware and one volume shown on the DSS.
    Now I want to add a 4th unit to the existing volume. From the 3ware side it looks like it is
    just a matter of swaping in a new drive and adding it to the existing volume.

    Now my question is: Will that extra space be available on the existing volume seen by DSS, or will it show up as a new separate volume?

    Can I easily expand the existing volume without loosing any data?

    King Regards
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules