NT Server Domain not found error

[To-M]

Please remember about correct file size please verify and compare from download. Link below to access ISO for NAS Enterprise.

http://www.open-e.com/data_storage_s...subserv=update

Update Instructions:
NOTE: this update will reset all settings to factory defaults.
Before Updating, all existing snapshots must be removed. You might have trouble to access your volumes after updating when you leave old snapshots on the server.
To be sure, that no snapshot is active, please deactivate synchronization as well.
Please write down the actual NAS server IP address and NAS server name. After having updated Open-E NAS, please re-enter both.
Please write down authorization settings.
Before Updating, please save “User”, “Groups”, “Shares” and “Assignments” under Menu: “Maintenance” �� “Resources Misc.” �� “Save resources”.
Please download and save NAS Server Logs:
Menu “Status” �� “Hardware” in Function Logs click on “Download”, then save on your local HDD.
The ISO-Files which include in update file must be burned on a CD with your favorite Burning software. (For example: Nero Burning ROM - option: “Burn Image”, etc.)
In order to re-flash the module, please install CD-ROM as Secondary-Master and DOM (disk-on-module) as Primary-Master. USB CD-ROM can be used as well.
Please set the BIOS to boot from CD-ROM drive. Then boot from the ISO-CD and wait until prompt: “Update complete, Please Remove CD and restart”
After re-fleshing, please reset the BIOS to boot from Primary-master HDD.
Updating the system may take about 10 minutes.
July 2006

[sysadmin]

Will try this coming Sunday.

[sysadmin]

Thanks Todd.

It is working as before!! Its joined to the domain and taking user lists from Domain Server.

We could have done this a lot earlier....anyway thanks for helping out.

Best regards
Ananth :-)