The Open-E able to detect the following controller and drivers

Controllers Info:
Network controllers:
- Intel Corporation PRO/1000 MT Dual Port Network Connection
- Intel Corporation PRO/1000 MT Dual Port Network Connection
RAID/SCSI contorollers
- Intel Corporation MegaRAID RAID Controller SRCS16 (firmware 713S)
- LSI Logic / Symbios Logic 53c1030 PCI-X Fusion MPT Dual Ultra320 SCSI (rev 08)
- LSI Logic / Symbios Logic 53c1030 PCI-X Fusion MPT Dual Ultra320 SCSI (rev 08)

Drivers Info:
Network drivers:
- Ethernet Channel Bonding Driver, v3.3.0
- Intel(R) PRO/1000 Network Driver
RAID/SCSI drivers:
- SCSI disk (type 0) and CDROM (type 5) dev handler for SCST using files on file systems or block devices
- SCSI target core
- iSCSI/TCP data-path
- iSCSI library functions
- iSCSI Transport Interfaces
- iSCSI generic (sg) driver
- SPI Transport Attributes
- LSI Logic MegaRAID Mailbox Driver
- LSI Logic Management Module

Unfortunately, In the GUI (Setup > H/W RAID), It only showed the follow:
Dynamic Unit Configuration
[] User dynamic unit configuration
channel:target - don't know what is it?
LSI Logic MegaRAID administration
- Please use console management tool (MegaRAID Manager).
- Please refer to MegaRAID user manual.

According to your Product compatibility, HDD controller (hardware RAID), it metion is support the Intel SRCS16 RAID Controller. http://www.open-e.com/service-and-su...re-raid/intel/

I'm still cannot control the Intel SRCS16 controller card. Is there any setting I missed?