failed to open driver node /dev/magaraid0

[To-M]

I not sure if this function will work for this specific controller but you should be able to configure it in the GUI under Setup > Hardware RAID.

[Moses]

The Open-E able to detect the following controller and drivers

Controllers Info:
Network controllers:
- Intel Corporation PRO/1000 MT Dual Port Network Connection
- Intel Corporation PRO/1000 MT Dual Port Network Connection
RAID/SCSI contorollers
- Intel Corporation MegaRAID RAID Controller SRCS16 (firmware 713S)
- LSI Logic / Symbios Logic 53c1030 PCI-X Fusion MPT Dual Ultra320 SCSI (rev 08)
- LSI Logic / Symbios Logic 53c1030 PCI-X Fusion MPT Dual Ultra320 SCSI (rev 08)

Drivers Info:
Network drivers:
- Ethernet Channel Bonding Driver, v3.3.0
- Intel(R) PRO/1000 Network Driver
RAID/SCSI drivers:
- SCSI disk (type 0) and CDROM (type 5) dev handler for SCST using files on file systems or block devices
- SCSI target core
- iSCSI/TCP data-path
- iSCSI library functions
- iSCSI Transport Interfaces
- iSCSI generic (sg) driver
- SPI Transport Attributes
- LSI Logic MegaRAID Mailbox Driver
- LSI Logic Management Module

Unfortunately, In the GUI (Setup > H/W RAID), It only showed the follow:
Dynamic Unit Configuration
[] User dynamic unit configuration
channel:target - don't know what is it?
LSI Logic MegaRAID administration
- Please use console management tool (MegaRAID Manager).
- Please refer to MegaRAID user manual.

According to your Product compatibility, HDD controller (hardware RAID), it metion is support the Intel SRCS16 RAID Controller. http://www.open-e.com/service-and-su...re-raid/intel/

I'm still cannot control the Intel SRCS16 controller card. Is there any setting I missed?

[To-M]

Are you able to configure this in our GUI and or with using the Intel® RAID Web Console 2 (java tool which connects to Open-E system and gives possibility to manage RAID controller).

[itr]

Hi Todd,

As I have mentioned before I have this problem too... I finally had some time to research on this and found that there was a change on kernel 2.6 due to the use of udev and the /dev/megaraid0 device is not created anymore causing this problem with the RAID management tools...

I do not completly understand the details but there is a patch for it and some more description that can be found here:

http://www.archivum.info/linux.kerne..._moved_to_misc

Could you guys please look into it? I would have done more troubleshooting to confirm this but as you know we do not have SSH access... BTW, did SSH made it to the 6.0 beta? will it be on the final release?

Thanks,

[To-M]

Thanks - I have forward onto the engineers to have them look into that patch. SSH is not going to make it in this first release - it is scheduled but engineers have to do several things before they provide this feature. It is coming .

Did you send the logs to support@open-e.com about this as well and if you did give me the ticket# so I can ask them the status.

[To-M]

Moses and Itr - please email support we want to provide you the DSS V6 for this issue. Currently it is a bug and we have this fixed in the next release. I will send you both an email on your forum inbox for further details.

[itr]

Hi Guys,

Just to follow up, I am using v6 BETA upd4 and this problem has been fixed as promised, the RAID tools work just fine now!!! love the new GUI by the way...

Looking forward for the final release...

Thanks a lot,

G