Unexpected Shutdown when initializing iSCSI Volume

[nsc]

After the crash in init volume lv000 : (lv000 1.5 To, lv001 1.4To, lv002 70GB) we restart server and it finish the init without any other trouble.

I removed everything and restart with 10 volumes of 100GB, we'll see.

[nsc]

OK shutdown on lv0006 Ã* 45%...

[nsc]

hmmm lv0006 was the only volume with replication activated... (my mistake)

[nsc]

OK shutdown again without any replication volume :

lv0000 100.00GB OK
lv0001 200.00GB OK
lv0003 400.00GB 99% => Shutdown
lv0002 300.00GB Waiting
lv0004 500.00GB Waiting
lv0005 600.00GB Waiting
lv0006 700.00GB Waiting

[To-M]

Can you obtain the Areca logs and send them to the support ticket 1009172 and send them to Areca for verification. Also we see a very high load from the CPU and engineers think it could be something with the RAID, recommend to do a RAID verify.

Also check to see if there is a another IP Address that is using the same address as the DSS 172.16.0.1 (Printer, PC... or other).

[nsc]

It's done Todd

I have sent everything to support.

[nsc]

Complete checking of volume done with ARECA, no errors.