Visit Open-E website
Results 1 to 10 of 11

Thread: Qlogic QLE2460

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 06-11-2009, 07:45 PM #1
    fowlen
    fowlen is offline Member
    Join Date
    Jun 2009
    Location
    UK
    Posts
    6

    Default Downloading

    Thanks for the link Tod, downloading now.

    If i set the card to inisiator mode in the gui it is not listed, strange but on reboot my card gets a link up led. If I then use the drop down and select target mode the card and wwn are reported ok but i never get a link.

    The C A F console reporps the card with no tools. My old copy of lite see's the card and lets me manage it from the console.

    Nige
    Reply With Quote Reply With Quote
  2. 06-11-2009, 08:01 PM #2
    To-M's Avatar
    To-M
    To-M is offline Administrator
    Join Date
    Jun 2006
    Posts
    3,074

    Default

    I know this card works.... strange that this is not working - did you restart again after setting to Target mode. Try with the new DSS V6 and see if that works.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube
    Reply With Quote Reply With Quote
  3. 06-11-2009, 11:07 PM #3
    fowlen
    fowlen is offline Member
    Join Date
    Jun 2009
    Location
    UK
    Posts
    6

    Default point to point modenot supported

    Hi Todd,

    looks like the ips driver will not support point to point topology, thats a real pain.

    I have been testing clustering with 3 servers and 4 hda's connected point to point, this works
    great with the qla2xxx driver, requiring no switch.

    The qle2460 does support this topology, the limitation must be the driver.

    Once i connected through my switch all worked.

    Is this a fault in the ISP driver from the stsc project and any chance it will get fixed.

    thanks

    Nigel
    Reply With Quote Reply With Quote
  4. 06-11-2009, 11:15 PM #4
    To-M's Avatar
    To-M
    To-M is offline Administrator
    Join Date
    Jun 2006
    Posts
    3,074

    Default

    This is strange as I checked on the forum here and found several working with this HBA - http://forum.open-e.com/showthread.php?t=423&page=4

    Is the HBA set to defaults and lets try to update to the latest version of DSS build 3513 or 3518 unless you have this already.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube
    Reply With Quote Reply With Quote
  5. 06-12-2009, 02:56 AM #5
    symm
    symm is offline Master
    Join Date
    Jun 2008
    Posts
    255

    Default

    Hi Fowlen

    Is the firmware up to date on the card ?
    Reply With Quote Reply With Quote
  6. 06-12-2009, 10:10 AM #6
    fowlen
    fowlen is offline Member
    Join Date
    Jun 2009
    Location
    UK
    Posts
    6

    Default firmware

    Firmware latest as per qlogic

    # 4Gb BIOS version 2.10
    # 4Gb FCode version 2.04
    # 4Gb EFI version 2.04
    # Firmware version 4.06.02
    # FlasUtil version 2.62
    # EFIUtil version 2.62

    Any ideas on getting this top work Point To Point.

    Nige
    Reply With Quote Reply With Quote
  7. 06-12-2009, 10:18 AM #7
    fowlen
    fowlen is offline Member
    Join Date
    Jun 2009
    Location
    UK
    Posts
    6

    Default Settings

    Todd,

    I have found snppets of this fault around and about.

    card is default at moment, but i have only changed the topology and speed options to
    P2P and 2gb to match my qla2310.

    I have tried latest version and beta 6. The lite version from last jan does appear to load the driver but need to check again. Was that version of the software using the qla2xxx or the ips driver

    Nige
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules