Quote Originally Posted by To-M
Engineers would like to see if you can test with the IETd instead of the default SCST - to change this go to the console then enter CTRL + ALT + W then Tuning options then iSCSI daemon then iSCSI solution then select IETd - you will lose connections from a reset and you will need to reconnect from the inititator side.

Thenks, this solution is help me, but after reboot DSS V6 physcial machines, XenServer warns that the dss v6 iSCSI stroage cannot be reconnected, therefore, I try to reconnect it. But while I try to connect the iSCSI stroage, after I type in IP and discovered the target IQN, then I try to discover the LUN attached to the IQN, then it fails, the error message on XenServer console is "no LUNs were found on IP. Check your settings and try again."

The same problem with openfire server, and this problem was resolved in this http://community.citrix.com/display/...+Openfiler+2.3
But, what can i do with DSS V6?

Thanks!