Visit Open-E website
Results 1 to 3 of 3

Thread: Performance

  1. #1

    Default Performance

    Is there a way to improve performance on these results ?

    hdparm -tT /dev/sdb1

    Timing cached reads: 4340 MB in 2.00 seconds = 2169.25 MB/sec
    Timing buffered disk reads: 34 MB in 3.18 seconds = 10.68 MB/sec

    Both SAN and client are connected on the same 1gbit switch.
    The SAN has two nic's bonded and is running a Hardware RAID10 array.
    Bonding mode is balance-rr
    Switch is a Cisco 2960

    No further optimalisations have been made....

  2. #2


    Hi Normanu

    Do you have cache enabled on your raid controller ?
    if you have the option for read ahead, enable it.

  3. #3


    bookmarked and b back l8er, bro, :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts