Visit Open-E website
Results 1 to 10 of 11

Thread: Test v6 beta 3 on production server

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    Can you check to see if you are in 64bit mode from the Console Tools CTRL-ALT-T then Boot options then System architecture. Not sure if you had previously set to 32bit mode and now is 64bit. You can change it then save and reboot.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  2. #2

    Default 64bit

    now 64 i was 64
    I try 32 and i'll let you know.

    Regards
    Alex

  3. #3

    Default 64bit

    it says not supported 64bit mode

  4. #4

    Default

    Switch back and then try to go to the Extended Tools CTRL + ALT + X then select "Default Volume Group" - this will restart the system.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  5. #5

    Default Same problem

    The system is still missing.

    but I can see my 2 lv in the volume manager.

    Alex

  6. #6

    Default

    So you can see the 2 LV's from the volume manager - what about your data? NAS or iSCSI?
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  7. #7

    Default

    both nas, the iscsi is on another system

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •