All below applies to ISCSI server demo CD v 2006.07.26 (iSCSI Enterprise Target Software - version 0.4.13)

1. Cannot create a volume group: Clicking on "Add" button gives a warning that all data on a unit will be lost. However, after that, the webpage displays "Add" again. My systems boots from CD-ROM on primary master, while a 40GB IDE HD Is connected to secondary master. The Unit Manager shows Unit H2 with the "Add" option.

The contents of addunit.log:
[Mon Aug 7 13:01:19 CEST 2006] Add unit start
parameter hdc new
sector size 512 /dev/hdc
1+0 records in
1+0 records out
1024 bytes transferred in 0.014174 seconds (72245 bytes/sec)
[Mon Aug 7 13:01:20 CEST 2006] Add unit start
parameter hdc new

vgdisplay :

Volume group "vg0" not found
[Mon Aug 7 13:01:20 CEST 2006] DONE


[Mon Aug 7 13:01:41 CEST 2006] Add unit start
parameter hdc new
sector size 512 /dev/hdc
1+0 records in
1+0 records out
1024 bytes transferred in 0.014977 seconds (68372 bytes/sec)
[Mon Aug 7 13:01:41 CEST 2006] Add unit start
parameter hdc new

vgdisplay :

Volume group "vg0" not found
[Mon Aug 7 13:01:41 CEST 2006] DONE


2. Selecting "Delete content of units" on the console menu results in error message:
"File descriptor 3 left open"
"Volume group vg0 not found"
after which the system reboots.

Thank you.