DSS 6 U4 installed on internal IDE disk
EX8350 with 4x 1TB
BIOS V2.9.0.28
Firmware V1.3.0.37 (also downgraded to 1.3.0.32)
If the RAID Controller is plugged in, DSS isn't able to boot! It stops at the point where the screen "Loading..." would appear. In 64bit mode I can see only a small green line in the upper right, in 32bit I see only a black screen... In both cases the internal HD has no activity.
If I remove the RAID Controller, the system is starting without problems, but without storage
This system was running perfect with Openfiler, but without Console Tools and WebPam support! So i didn't noticed that 2 of 8 HDs in RAID6 already died...