Visit Open-E website
Results 1 to 2 of 2

Thread: Check iSCSI Target

  1. #1

    Default Check iSCSI Target

    I have created a iSCSI target based on DSS Lite 6.0 and have connected it with a Windows clients iSCSI initiator. On first glance everything works fine - I have copied quite some data to the new drive. I can see the data from the initiatior - but how can I check, the data really made it to the target and is not saved in any cache or similar.

    Your advice would be appreciated.

    Gerhard

  2. #2

    Default

    You should be able to check properties of the iSCSI volume.

    also if you are still testing try to disconnect and reconnect and you should see the data after reconnect.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •