Visit Open-E website
Results 1 to 6 of 6

Thread: Qle4062c-ck

  1. #1

    Default Qle4062c-ck

    Is the Qlogic 1GB DUAL PORT iSCSI PCIe RJ45 COPPER (QLE4062C-CK) compatible with Open-E DSS 5.0 and above?

    Thanks.

  2. #2

    Default

    Only the list from the link below do we have support for initiator mode only.

    http://www.open-e.com/service-and-su...ator/hardware/
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  3. #3

    Default

    I've installed one in my DSS running version 5.0.DB49000000.3278. It's listed under hardware but nowhere else that I can see in the DSS GUI. Is there any way of making it work or do I have to buy an older model on ebay that doesn't support PCI-E?

    Thanks


    Network controllers
    ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
    ASUSTeK Computer Inc. Marvell 88E8052 Gigabit Ethernet Controller (Asus)
    QLogic Corp. ISP4032-based Ethernet IPv6 NIC
    QLogic Corp. ISP4032-based Ethernet IPv6 NIC

    RAID/SCSI controllers
    Areca Technology Corp. ARC-1231 12-Port PCI-Express to SATA RAID Controller
    QLogic Corp. ISP4032-based iSCSI TOE IPv6 HBA
    QLogic Corp. ISP4032-based iSCSI TOE IPv6 HBA

    Network drivers:
    Ethernet Channel Bonding Driver, v3.2.5
    Marvell Yukon 2 Gigabit Ethernet driver
    SysKonnect Gigabit Ethernet driver

    RAID/SCSI drivers:
    SCSI generic (sg) driver
    SCSI disk (type 0) and CDROM (type 5) dev handler for SCST using files on file systems or block devices
    SCSI target core
    iSCSI/TCP data-path
    iSCSI library functions
    iSCSI Transport Interface
    ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID HOST Adapter

  4. #4

    Default

    We dont have this card for testing but I think it will be used as a NIC only, check in the Setup > Network interfaces to see if it is there as a NIC. If not then you will most likely be better off using the older ones or go with a 1GbE NIC.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  5. #5

    Default

    Quote Originally Posted by To-M
    We dont have this card for testing but I think it will be used as a NIC only, check in the Setup > Network interfaces to see if it is there as a NIC. If not then you will most likely be better off using the older ones or go with a 1GbE NIC.
    How about I sent it to you and you can test it/support it, then send it back?

  6. #6

    Default

    Possibly but keep in mind they will only support it as an initiator not as a target. It will take some time for engineers to get to it. Send an email to support@open-e.com asking if you can send this in and verify if this can be used and if it is possible first before sending it in.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •