Not sure if I configured something wrong or this is normal, but when I restart Open-E I get 21 emails, each one with 1 line of text... The subject is always Errors from XXX on YYYY
Most of them seem to be normal startup notifications or bond status, etc...
Can't all of these be merged into 1 startup notification email?
I want my support staff to get these alerts in case there is a problem tat requires attention, but I certainly do not want to spam them...
Error(s) on tostorage01 from kernel
2009/07/14 19:58:59 kernel:bonding: bond0: link status definitely up for interface eth0.
Error(s) on tostorage01 from [07/14/2009 (20:00:32)]:
[07/14/2009 (20:00:32)]::
Error(s) on tostorage01 from RAID Monitor Service Ver Linux 3.8 April 15, 2005 started
RAID Monitor Service Ver Linux 3.8 April 15, 2005 started:
Error(s) on tostorage01 from [07/14/2009 (20:00:32)]:
[07/14/2009 (20:00:32)]::
Error(s) on tostorage01 from MailFlag value set as:-
MailFlag value set as:-:
Error(s) on tostorage01 from MailFlag: 1 (0-means no mailing of events will be done
MailFlag: 1 (0-means no mailing of events will be done:
Error(s) on tostorage01 from 1-means events will be mailed also).
1-means events will be mailed also).:
Error(s) on tostorage01 from
:
Error(s) on tostorage01 from [07/14/2009 (20:00:32)]:
[07/14/2009 (20:00:32)]::
Error(s) on tostorage01 from -: Initial CheckConsistency Schedule :-
-: Initial CheckConsistency Schedule :-:
Error(s) on tostorage01 from EnableFlag: 1
EnableFlag: 1:
Error(s) on tostorage01 from Date: 07/14/2009
Date: 07/14/2009:
Error(s) on tostorage01 from DayOfWeek: 0
DayOfWeek: 0:
Error(s) on tostorage01 from HourOfDay: 0
HourOfDay: 0:
Error(s) on tostorage01 from Week(s): 1
Week(s): 1:
Error(s) on tostorage01 from ReportChkonProgInterval: 0 seconds(0 means report in-frequently)
ReportChkonProgInterval: 0 seconds(0 means report in-frequently):
Error(s) on tostorage01 from [07/14/2009 (20:00:32)]:
[07/14/2009 (20:00:32)]::
Error(s) on tostorage01 from -: Initial SMART Polling Schedule :-
-: Initial SMART Polling Schedule :-:
Error(s) on tostorage01 from SMARTPollingOn: Yes
SMARTPollingOn: Yes:
Error(s) on tostorage01 from SMARTPollingInterval: 60 Seconds
SMARTPollingInterval: 60 Seconds:
Error(s) on tostorage01 from kernel
2009/07/14 19:58:59 kernel:bonding: bond0: link status definitely up for interface eth1.
As you can see, all of them have just 1 line of content, not really errors, all informational and that line is already part of the suject...
By the way, way SMARTPollingOn is Yes and every 60 sec if I disabled S.M.A.R.T. on the console? no clue...