Visit Open-E website
Results 1 to 3 of 3

Thread: How to use ESX3.5 connect to DSS with Fibre Channel target?

  1. #1

    Default How to use ESX3.5 connect to DSS with Fibre Channel target?

    Hi there,

    I'm a new DSS user.I want to setup three ESX3.5 host to connect DSS box directly via Fibre channel (two Qlogic 2462 card) .
    But I try to many times,all were failed.


    Please help me.

    Thanks.

    Fortune Rgds.

  2. #2

    Default

    Try to verify in the GUI from Setup > FC to make sure it is set to Target mode then hit apply and restart. Also verify from the BIOS of the FC HBA that you can see the others from the VMware side.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  3. #3

    Default

    Quote Originally Posted by To-M
    Try to verify in the GUI from Setup > FC to make sure it is set to Target mode then hit apply and restart. Also verify from the BIOS of the FC HBA that you can see the others from the VMware side.
    Tom,

    I am sure it us set to Target mode.I also reboot DSS and ESX host several times.but at ESX side can't found any LUN disk.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •