I'm trying to get running DSS on VMWare Server 2
I have a VM with 2 hard drives, one with 2GB and with the boot image properly installed, the second virtual drive drive is 3GB.
Open-E VM starts OK and everything seems to run fine, I log into the HTTPS interface and when I go into the Configuration > Volume Manager > Vol. Groups section I can see under the drive identifier I can see the 3GB drive.
But in the Unit manager part of the screen I can see a row showing the drive as Unit S001, Size 3GB, Serial Number N/A and Status as NOT SUPPORTED and the checbox, the action dropdown, the name textbox and the apply button are disabled and grayed out.
In the manual and the online help we have a note that you will need more then 5GB for a unit.
Note
* Units already being used in a volume group can be made available again by using the Delete content of units function in the console. Please be aware that this will remove all data from the unit!!!
* You can only use units with capacities greater than 5 GB, smaller units are not supported.
How to unprotect the right protected pen drive ; done by viruses? The pen drive is right protected by viruses . When pen drive is tried to format then the message appears that it cannot be formatted because it is right protected . So please help me to unprotect it . I cannot even keep the data in the pen drive due to its right protection.And I have also tried to remove it using different antivirus but it fails to delete or quaritine it.