I would like to know if there is any company who successfully setup a server room similar to mine:
• 1 Open 8 TB
• 3 Esx Server
Since I bought this solution, I move from one disaster to another, lost communication between ESX and Open-E, Open-E interface stop responding, corruption of my virtual disk, poor performance over 3 ESX, etc…
So far I spent over 100k$ in this project. Is the technology just plainly unstable for corporate use or should I fired my supplier?
100k include everything, hardware, software and setup.
My supplier is handling the support so I dont know the ticket # if there is any. That said, I just ask my team to open a ticket directly. Any support will be extremly welcome.
Dear Anashel;
Depending on your infrastructure it should be very robust. OpenE and VMWare work very well together. What are you using for targets? FC or iSCSI? If the VMware best practices are followed you should have no troubles like you have described. We have many customers with your configuration, using Open-e for the management software and our mix of best-of-breed components for the hardware. If you want, you can email us (my company) at: stelter@massmountain.com or just get back to me in this forum.
I have a similar setup I guess you could say.
I have 2 x 8TB Open-E servers (custom built hardware, supermicro mainboard, 3ware raid card, intel nics) in isci failover setup.
I have 8 VM Hosts (ESXi 4.1) with around 60VM guests spread across these hosts (all in a VM Cluster with EVC).
Apart from some teething issues, bad hardware mainly/learning curve the others .
DSS V6 has run pretty much perfectly.
I have 6 nic's in my Open-E serves with 4 of them allocated to the iSCSI network (MPIO) via dedicated switches (I have 2 switches for the iSCSI traffic, and 2 for my inet traffic). This is all to handle any failures. 1 of the nic's is direct connected to the other SAN for replication traffic, and the last nic is for management.
DSS is very capable and is VMWare friendly.
Maybe post up more of your configuration and issues you have had?