I wanted to keep this at the top
I wanted to keep this at the top
Build 3537. I'm not able to add to ADS because of the time problem.
I have only used Open-E for ISCSI in the past and I elected to try the free version to demo the NAS features.
Had the same issue. Reported it to support. They sent me a small update that fixes the issue.
Han.
Originally Posted by dlusk
I will try again. Did you just use the "support form" on the web sight
Don
I just emailed support requesting help on the issue. I referenced this thread and mentioned that someone got a fix. I will post if/when I get a response.Originally Posted by dlusk
Thanks,
Kyle
We have trying connect DSS trial to AD long time. And finaly find that problem is exactly same - wrong time zone. And we can not change from default. Trial failed. We will look for some other storage software.
I had the same problems when I installed a system using Build 3719.
Support sent me an update which returned "Wrong Product Update", but when they realised I was using the Lite version they sent me an alternative update.
This worked a treat.
Whilst I don't seem to be able to attach them here, I have uploaded both to an area of my website - hopefully this will help others with the same issue.
For DSS Lite: http://www.nas.uk.com/OpenE/upd_0559-DSS_V6Lite.zip
For DSS (trial - untested by me): http://www.nas.uk.com/OpenE/upd_2009_9_9_2.zip
Simple instructions
1.Extract the UPD file to your local system
2.Login to the DSS GUI
3.Navigate to MAINTENANCE - SOFTWARE
4.Select the UPD file and select Apply
5.Reboot the server
Hope this helps.
Support do you have an update for the version version 6.0up10.8101.3719 64bit so that it will permit me to update Time Zone settings
Tried to create a support email but loops between the support website's steps 4 and 5