Adaptec ASM - Eclosures don't show properly?

[smasher953]

Production DOM upgraded the 3518, it wouldn't take the small update for the adaptec 6.1 ASM update as it said it was already installed.

Connected with my ASM client from my Windows box, everything seems to work as expected in regards to the ASM client.

Hopefully this thread will help someone else troubleshooting the same issue.

--greg

[d2globalinc]

I think we need a version upgrade of ASM in DSS v6 -

I have an adaptec 51245 card with latest firmware and the MaxIQ SSD Kit add-on. I upgraded everything to latest firmwares (required by MaxIQ) and have tested this configuration with Centos 5.4 and the latest version of ASM and it worked fine and everything shows up as it should.

In DSS v6 latest version I downloaded yetserday (3/16/2010) to test and look at purchasing the ASM manager shows my Logical RAID10 disk array, however all the disks show up as "Other Devices" and the MaxIQ SSD doesn't show up at all.

My ASM Client version is 6.40.00 (18530)
My Card Details:
Adaptec 51245
Boot ROM 5.2-0 (17544)
Firmware 5.2-0 (17544)
Device Driver 1.1-5 (2456)


I also see an Exclamation point in the ASM showing DSS is running 4.30.00 (16038) of asm - which im sure is why this is all not showing up right..

Anyway we can upgrade this ASM ourselves in DSS? I checked for updates in the WebGUI but nothing is available...

Thanks!

D2G

[d2globalinc]

Ignore my post - I didn't check the link above first before posting all that non-sense I just did! Anyone else looking to solve this issue, it looks like you goto this thread and read:

http://forum.open-e.com/showthread.p...=adaptec+agent

The link at the end of that post didn't work - but I think you can find what you need here:
ftp://ftp.open-e.com/SMALL_UPDATES/

which is what I'm going to try next

- D2G

[bliemeister]

Where can I find an updated version of asm for DSS V6? The links do not work.

[To-M]

Submit an support ticket asking for this and we will get this to you.