I've upgraded my Belinea b.center to DSS v6 by using a new USB Stick:

1) Remove the internal USB Stick
2) Copy the DSS source to the new USB Stick
3) Connect USB Stick with external USB Port of Belinea
4) Start b.center

There is also a guide, how I've done: http://www.server-talk.eu/2009/10/15...s-mit-hyper-v/

Because I use the 64-Bit of DSS v6, I had to remove all the old Volumes. Or I could also use the 32-Bit edition.

Note: Because I don't have a graphiccard in my b.center, I used another computer to set the configuration (Architecture, IP).

I use only the USB Stick, you don't have to install it!

Cheers
Miguel