this is froma clean install:
I have tried on multiple usb drives and it stops or hands at 37% loading. Now if i use usb that already a configured dss server on it it will fully boot.
supermico server x5dpr-tg2+ with latest bios.
this is froma clean install:
I have tried on multiple usb drives and it stops or hands at 37% loading. Now if i use usb that already a configured dss server on it it will fully boot.
supermico server x5dpr-tg2+ with latest bios.
same problem here. After installing a new usb drive it will only boot up to 37%
hw info will follow
supermicro X8ST3-F