Problem with AFP talk

[symm]

08:00.0 "Ethernet controller" "Intel Corporation" "80003ES2LAN Gigabit Ethernet Controller (Copper)" -r01 "Intel Corporation" "Unknown device 3484"
08:00.1 "Ethernet controller" "Intel Corporation" "80003ES2LAN Gigabit Ethernet Controller (Copper)" -r01 "Intel Corporation" "Unknown device 3484"


[Tue Jan 05 19:33:21 2010] [error] [client 192.168.5.25] PHP Warning: require_once(session.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in /mnt/hda3/www/css/IE/menuIEFix.css.php on line 2, referer: https://dss/index.php?module=menu
[Tue Jan 05 19:33:21 2010] [error] [client 192.168.5.25] PHP Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required 'session.php' (include_path='.:/usr/share/php') in /mnt/hda3/www/css/IE/menuIEFix.css.php on line 2, referer: https://dss/index.php?module=menu

[symm]

Hey amitmittal

I looked at your logs, please see my previous post with errors in you logs.
I think the Intel Corporation" "80003ES2LAN is supported.

Can you try to remove bond and test.

also what is at 192.168.5.25
can also check to see if the nic has the latest firmware.

This looks like a problem with the disk array but can be related to memory.
can you run a memory test ?


sd 3:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 3:0:0:0: [sda] 27343454208 512-byte hardware sectors (13999849 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 3:0:0:0: [sda] 27343454208 512-byte hardware sectors (13999849 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
sda: unknown partition table
sd 3:0:0:0: [sda] Attached SCSI disk
attempt to access beyond end of device
sda: rw=0, want=18446744066693267456, limit=27343454208
attempt to access beyond end of device
sda: rw=0, want=18446744066693266432, limit=27343454208
attempt to access beyond end of device
sda: rw=0, want=18446744066693267452, limit=27343454208
attempt to access beyond end of device
sda: rw=0, want=18446744066693266428, limit=27343454208
attempt to access beyond end of device
sda: rw=0, want=18446744066693267460, limit=27343454208
attempt to access beyond end of device


0000:05:00.0: : Failed to initialize MSI interrupts. Falling back to legacy interrupts.
0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:15:17:29:01:10
0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:05:00.0: eth0: MAC: 1, PHY: 4, PBA No: d47316-004
e1000e 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:05:00.1: setting latency timer to 64
0000:05:00.1: : Failed to initialize MSI interrupts. Falling back to legacy interrupts.
0000:05:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:15:17:29:01:11
0000:05:00.1: eth1: Intel(R) PRO/1000 Network Connection
0000:05:00.1: eth1: MAC: 1, PHY: 4, PBA No: d47316-004
e1000e 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:06:00.0: setting latency timer to 64

[amitmittal]

Problem resolved after reconnect External LDAP (Windows ADS).
Thanks for your support.