Visit Open-E website
Results 1 to 3 of 3

Thread: Intel SS4200

  1. #1

    Default Intel SS4200

    Hello everybody,

    I was gonna test the DSS 6 lite with my new Intel SS4200.
    Has anybody ever got this to work?

    The Intel "box" does not have a graphics card installed :-/

    I did put DSS on a USB stick und made it bootable.

    The device does fire up but it is not accessable via web on the default IP address 192.168.0.220.

    Any ideas?

    Thanks in advance!
    André

  2. #2

    Default

    Did you use https:

  3. #3

    Default

    Hi,

    I tried the same and have similar problems.
    I configured the setup on another mainboard, with graphic interface. Changed the IP address and adjusted the boot procedure to run the 32bit system. I still found out witch config files have to be change to get an output to the serial interface. But when the Open-E logo appears it's over.
    I see, the system is starting up, I can't get connection over the network. But it seams the software is running. If I press the start button on the front the system shut down after a few seconds.
    Even a ping or ssh is not working.

    Maybe somebody can help me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •