Hi,

i've used a 3ware 9650SE-4LP with 4*1TB SATA drives for a long time (before i've upgraded to the 3ware 9690SA-4I and SAS drives) without any problem.

Contrary to your wish configuration i used a RAID5, because more utlilizable space on the RAID ... only 25% of wasted space with a 4 drive configuration.

The 3DM2 web GUI could be directly accessed with " https://NAS-IP:888 " to set or change configuration on the 3ware controller ... or use the access over the NAS web GUI " >> setup >> H/W Raid >> 3DM "

Regards
Marty