Visit Open-E website
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: vSphere Open-e

  1. #11

    Default

    thanks Todd!
    It's working!!!
    There is a OPEN-E version active / active?

    Thanks!

  2. #12

    Default

    We are looking into this to have this feature but there is no set date.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  3. #13

    Default

    Todd,
    What is the best configuration with 2 nodes and 4 cards each?
    I thought:

    DSS01:
    eth0: 192.168.0.1 -> Management
    eth1: 192.168.1.1 -> iSCSI1 - Failover (Virtual IP 10.0.0.1)
    eth2: 192.168.2.1 -> iSCSI2 - Failover (Virtual IP 10.0.0.2)
    eth3: 192.168.3.1 -> Heartbeat

    DSS02:
    eth0: 192.168.0.2 -> Management
    eth1: 192.168.1.2 -> iSCSI1 - Failover (Virtual IP 10.0.0.1)
    eth2: 192.168.2.2 -> iSCSI2 - Failover (Virtual IP 10.0.0.2)
    eth3: 192.168.3.2 -> Heartbeat

    ESX iSCSI:

    Connect with 2 vmkernel to 2 iSCSI IP for redudancy -> 10.0.0.1 e 10.0.0.2

    What do you think?

    thanks!

  4. #14

    Default

    Yes this is good but check my notes:

    DSS01:

    eth1: 192.168.1.1 (Set the Aux for this Primary Node)-> iSCSI1 - Failover (Virtual IP 10.0.0.1)
    eth2: 192.168.2.1 -> iSCSI2 - Failover (Virtual IP 10.0.0.2)
    eth3: 192.168.3.1 (Set the Aux) -> Heartbeat

    DSS02:

    eth1: 192.168.1.2 (Set the Aux for this Secondary Node)-> iSCSI1 - Failover (Virtual IP 10.0.0.1)
    eth2: 192.168.2.2 -> iSCSI2 - Failover (Virtual IP 10.0.0.2)
    eth3: 192.168.3.2 (Set the Aux) -> Heartbeat
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  5. #15

    Smile

    mmmhhhh!!!! I don't understant...
    ...and my eth0 card????
    Where is?
    thanks for your patience..!!

  6. #16

    Default

    eth0 is the management NIC so no need for me to address it and I wanted to make sure that the other NICs have AUX enabled when using w/ Auto Failover. This also noted in the "How to resources and the Auto Failover video from the links below.

    http://www.open-e.com/library/webcasts-and-demos/


    http://www.open-e.com/library/how-to-resources/
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •