eth1: 192.168.1.1 (Set the Aux for this Primary Node)-> iSCSI1 - Failover (Virtual IP 10.0.0.1)
eth2: 192.168.2.1 -> iSCSI2 - Failover (Virtual IP 10.0.0.2)
eth3: 192.168.3.1 (Set the Aux) -> Heartbeat
DSS02:
eth1: 192.168.1.2 (Set the Aux for this Secondary Node)-> iSCSI1 - Failover (Virtual IP 10.0.0.1)
eth2: 192.168.2.2 -> iSCSI2 - Failover (Virtual IP 10.0.0.2)
eth3: 192.168.3.2 (Set the Aux) -> Heartbeat
eth0 is the management NIC so no need for me to address it and I wanted to make sure that the other NICs have AUX enabled when using w/ Auto Failover. This also noted in the "How to resources and the Auto Failover video from the links below.