trouble use USB to install open-e

[ekoh]

I can use the USB stick to boot open-e V6. but when i use it to install open-e , I got the error:

egrep: /proc/bus/usb/devices: No such file or directory
#

some info :

open-e Version: 6.0up14.8101.4221 64bit
M/B : supermicro X8SIA-F
CPU: Intel(R) Xeon(R) X3450 @2.67GHz

Thanks!

[sweet_man]

Read this PDF , it will show you the steps how to install open-e on your flash memory

http://www.open-e.com/download/libra..._file/get/115/

go with each step carfully. it should work.

and its better to format your USB stick befor you start all the work.

[ekoh]

Hi sweet man,
Thank you very much for you reply.

Yes, I have read the manual. And I have use the same USB to install open-e DSS V6 on other servers without any problem.

Maybe I have to use the ISO file to make a CD...

[sweet_man]

Thank you too ekoh, well yes I think you may have a problem with the space at your flash memory ,it may doesn’t have enough space .

Also be sure that you are choosing the 64bit version because you have a Xeon CPU( 64-bit architecture processor

tell us what will happend with you .

[ekoh]

Hi,

I have use a 4GB USB-Stick. And before use it , I have format it with FAT32.

When I boot my server from this USB-Stick, I can run TRIAL 64bit version and no problem. But, when I tyied to run INSTALLER. I got the error. And the server became freeze. :-(

[sweet_man]

then give it a try with the CD , to see if the problem still happend or not.