Hello,
I encountered some troubles with DSS v6 iSCSI auto failover in combination with Windows 2008 R2 failover cluster when using MPIO.
When doing a failover/failback on DSS one of our two Windows cluster nodes reboots with a BSOD. If we use only one iSCSI connection without MPIO there is everything running smoothly (with small warnings/errors on cluster disks).
Some comments from open-e? Do you have tested this combination (DSS failover + Windows R2 cluster + MPIO)?
DSS failover + MPIO is ok, DSS failover + Windows R2 cluster is ok, but all three there are troubles ...!?