Hi,

i tested the Lite Edition, i had a RAID1 Setup working. For Testing i shutdown the box.
I removed one RAID1 Disk. After Restart, DSS send a message about RAID1 degraded!

After 2 Weeks i added the removed Disk (My Misstake, i know).
But DSS doesnīt rebuild the RAID1 (Warning to all Users)!

So i cleaned all data on the remaining volumes and reseted the box with default settings.
After resetting IP address i canīt recreate a RAID1,

I would like to recreate a RAID1 with "1" Disk in degraded mode (as described in the online help).

But the box shows the single Disk with state "Unit S003 S/W RAID PART" in red.

How do i reset all the RAID Settings and can recreate a RAID1!

Any help is welcome!