How do I delete Logical Volumes?

[To-M]

Download PUTTY then Read the Online Help manual - I have pasted it below.

Using this function, you can manage console tools remotely via the SSH protocol (secure shell). The default user is cli and cannot be altered. The password, however, can be changed.

Allow IP
Here you can assign IP addresses (separated by a semicolon) which are granted remote access to the server. When left blank, the field indicates no restrictions.
Set port
The default port is 22222 for security reasons, because high-number ports are invisible to port scanners. You can only change the setting to a port within the 1024-65535 range. You cannot indicate ports already in use.
Password
Password length is 5 characters minimum. Be sure to use strong passwords.
Confirm password
Please retype your new password.

Password cannot contain:

* special characters such as ' " ` ^ & $ # [ ] \/ | *
* spaces

To connect to the server from Linux/MacOSX systems use:
ssh -2 -p 22222 -l cli ip_address
where:

* option: -2 indicates the SSH protocol version used for connection
* option: -p indicates the remote access port
* option: -l indicates the user (the user needs to be cli)
* option: address_ip indicates the address of the server to which you want to connect

You will be asked for the remote access password you have entered on the server.

To connect to the server from Microsoft Windows, download the free SSH client (Putty):

* in the Host Name (or IP address) field, enter the IP address of the server
* in the Port field, enter the same port as in the server GUI (default 22222)
* in the Protocol field, select SSH
* in the category: Connection -> Data -> Auto-login-username, enter: cli
* in Terminal -> Keyboard -> The Function Keys and keypad, select VT100+
* go back to the Session category, enter the session name in the Saved Sessions field, and click the Save button
* click on the newly saved session, click Open, and enter the password. (If you have not entered the Auto-login-username, Putty will prompt you for a username. At the prompt, enter cli).


Location
SETUP -> administrator -> Function: Remote access

[jimac]

Thanks for your help!

I've just done that...... all the dates/times are from today, we did the earliest one and the targets are back, but not the logical volumes.

can you offer any more advice/hope please?

[To-M]

If the Targets are back then the Logical Volumes are there as the Targets are tied to the LV's. Maybe do a refresh on the GUI use Firefox or other.

[jimac]

just e-mailed you.
Unfortunately, they're not there.

[To-M]

ok I will contact you in a min.

[ThomasAnderson]

Use the Volume manager to delete or create the volume. or use
expand <vol>
uncheck the replication and apply.

________________________
Windows Drivers Update