Different subnets
Hi there,
If I were you, I would seriously consider moving each MPIO path to a different subnet, since VMARE and OPEN-E will not know which adapter to send the traffic out on, since they all share the same subnet.
We use different subnets and this works perfectly, albeit without Failover - since we don't have that configured.
So your setup would become:
eth0 - VIP 10.1.5.1/24
eth1 - VIP 10.1.6.1/24
eth2 - VIP 10.1.7.1/24
eth3 - VIP 10.1.8.1/24
Best regards
TFZ
If it can go wrong, it generally will!