Problems with access to a network drive

[To-M]

Please run the Repair Filesystem in the Extended tools also make sure that you are on the latest version of the NAS-R3 below.

NAS-R3 build 3570

The new version update of DSS V5 up 49 build 3570 is ready for download from our FTP:

URL: ftp://software:enterforupdate@ftp.op...49_build_3570/
(This update is for version 5.0 up 49 build3294 and 5.0 up49 build 3553 ONLY!)

[4erdeb002]

Is this safe (operation with Repair Filesystem) for data on storage drives?

[To-M]

Yes or re-install and then check the raid health from the vendor.

[4erdeb002]

Hello!
Using the tool Repair Filesystem helped only partially. The problem was complex - from time to time system freezes and only hard reset returns it to work. In the log was something like a "bad stripe". Found a possible complex problem with Adaptec / ICP Storage Manager

http://ask.adaptec.com/scripts/adapt...ted=1172018702

and Seagate Barracuda

http://ask.adaptec.com/scripts/adapt...i=&p_topview=1.

Had to update the HDD firmware to recommended and build the raid array again (backup your data!!!). 5 months NAS working as a clock . Maybe my experience will help for someone. Thread can be closed.
And thanks for the help!!!

[To-M]

Thanks for the update and yes this could help others!