Hi guys,
I'm hoping someone can help me out, i have read the guide to setting up iscsi failover but i'm confused how i set it up with MPIO.

My current setup is as follows:

San1
eth0 192.168.10.220 - volume replication nic
eth1 192.168.11.220 - MPIO Nic1
eth2 192.168.12.220 - MPIO Nic2
eth3 192.168.13.220 - MPIO Nic3
Bond0 10.0.0.21 - Web access

San2
eth0 192.168.10.221 - volume replication nic
eth1 192.168.11.221 - MPIO Nic1
eth2 192.168.12.221 - MPIO Nic2
eth3 192.168.13.221 - MPIO Nic3
Bond0 10.0.0.31 - Web access

Syncronous volume replication is setup and appears to working fine

So my questions are which addresses do i use for the primary/secondary IPs in the setup also the auxiliary connection?

do i need to add virtual addresses to all the MPIO nics and connect iscsi initiator to that address? thanks guys!!