Installer Fails - boots from CD then gives a '#' prompt :-(

[To-M]

Hi Andy,

So is this system having everything the same even the RAID controller? Is all firmware updated ? Seems strange that it would not work, try with USB instead of the CD-ROM and also try just booting with the USB to test first that it is a good install from the USB.

[andybh]

try with USB instead of the CD-ROM and also try just booting with the USB to test.

Strange but installing from USB stick worked fine....

The only difference between the two units was the external CD Rom drive I was using to do the install.

Glad to say that I'm up & running now :-)


Cheers,

Andy

[Gr-R]

On the failing machine, I can boot from external CD but after choosing the software installer option, I get "LOADING" showing in the bottom left corner of the screen for a while before it drops out to a blank black screen with a single '#' prompt

This can sometimes be from a bad file download, or bad cd burn. However in your case it would seem you actually have a drive that cant read the data.

Glad you got working with the USB device, but you may still want to retire the cd drive.