Volume Replication

[salmon]

Ok, You can try change some tuning options. In console go to Hardware Configuration (ALT + CTRL + W) and choose "DRBD tuning".
Here you can find some info about available options http://www.drbd.org/users-guide/re-drbdconf.html

I learned today that balance-rr and replcation doesn't always work as expected. The perfect solution would be using 10Gb ethernet cards, but probably this is not an option?

[lk-ooe]

I take a look at the website www.drdb.org and on the options under "DRDB Tuning". I think this is a difficult issue and it needs many time to evalute an test it. Currently I have not the time because the System must go to production. But we plan a 10Gb Connection for Replication between the Servers in the next months.

Thank you very much for your help!

[blindzero]

I learned today that balance-rr and replcation doesn't always work as expected. The perfect solution would be using 10Gb ethernet cards, but probably this is not an option?

Well, I just learned that too from the open-e guys, but bonding will not help at all.
And it makes completely sense. In bonding mode the source is selecting one path - lets say per session. So if the session does not change (and it is not when the sync is running, the same with iscsi) it will not give you performance boosts at all.
Have a look at the following blog article of open-e. It made completely sense to me:

http://blog.open-e.com/bonding-versus-mpio-explained/

Bye,

Matthias