install problems, keyboard out of function

[Gr-R]

DSS loads standard drivers for Keyboard support.

Is it working if you boot to the system bios ?

USB or PS/2 ?

Have you tried another keyboard ?

[Einnell]

Yeah, this system got only USB, there are no PS/2 ports. I tried 3 different keyboards, all are working in BIOS and choosin Open-E "installation", it stopped working when "licens aggreement" needs input (at beginning of installation with blue background).

[Gr-R]

odd......

it may sound silly, but the only 'enter' key that is going to work is the one by the letters. If you are pressing the 'enter' on the number pad, it won't work.

[Einnell]

I tried ENTER, ENTER on num, Space, Tabkey (to switch) there are no reactions on any key.

[To-M]

Check BIOS of motherboard and make sure USB Keyboard is enabled.

On the system try placing the USB Keyboard in front of the system and the USB for the DSS V6 in the back of the system.

[Einnell]

My results,

- all USB options are enabled in BIOS
- used 2 USB Keyboards, one in front and one in back
- booting from CD => choosin "Run software installer" => loading => Licens Agreement keyboards still out of function
- preparing USB stick for booting, run "bootinst" (works fine), booting from USB (Corsair Flash Voyager 8GB) in the back of system => blackscreen

Tomorrow ill try on

[Nick]

Hello Einnell,

same problem to me a few months ago.

Solution: in the boot menu you have to delete the "nousb2" option of the "install" entry. To archive this, you have to select "install" press TAB navigate to "nousb2" and remove it. Press ENTER and the installer comes up. The other menu entries will work, no edit needed.

HTH
Nick