RAID set enlarged , sites shows new size - but VG shows Free=0

[To-M]

Data will be preserved if DSS has this as its own volume, settings and config should be saved from the GUI in Maint. > Misc. and take all 4 options.

If you have added a FC volume using our FC Initiator then you see it in our Unit manager without a restart.

[aclhkaclhk]

i want to connect this product to DSS via FC
http://www.huaweisymantec.com/en/Pro...End_SAN/S2600/

do you think the FC initiator will support?

[Gr-R]

i want to connect this product to DSS via FC
http://www.huaweisymantec.com/en/Pro...End_SAN/S2600/

do you think the FC initiator will support?

looks more like a self contained unit, with its own software.

[aclhkaclhk]

i want to use this as direct attached storage to DSS (pls ignore the sw features). i could create 10G iscsi storage server with replication inexpensively. proprietary san servers with these features are very expensive today!

pls advise.

[Gr-R]

Honestly, I dont know if it will connect or not.
Maybe ask that vendor...... from DSS the FC initiator is nothing special, nothing proprietary.

[aclhkaclhk]

i will connect qlogic fibre channel adapter to the SAN device. the vendor replied that the qlogic driver is enough to recognise the LUNs.

do you think DSS will support?

[Gr-R]

i will connect qlogic fibre channel adapter to the SAN device. the vendor replied that the qlogic driver is enough to recognise the LUNs.

do you think DSS will support?

from new release notes:
- MPIO mode with FC HBA's in INITIATOR mode does not work. MPIO will function in FC TARGET mode. Only QLOGIC FC HBA's are supported in TARGET mode