open-E over KVM

[ahmedeg]

i am trying to install open-E over KVM for supermicro
i always get this error

egrep: /proc/bus/usb/devices: No such file or directory

As i understand the KVM emulate the ISO file as USB CD ROM

[To-M]

Not sure but but is there other USB devices on the system? Check that the ISO or ZIP file is correct from the md5 file when you downloaded the DSS V6.

[ahmedeg]

MD5 is correct.
Yes there is other USB for the KVM

any suggestion?!!

[To-M]

Just so that I am sure it works as a basic install does it install without a KVM just using the USB directly to the system and does the USB Flash stick boot as well? I want to make sure all that is working before we go into the KVM.

[ahmedeg]

Since i am not in datacenter it's a dedicated server
ISO Kvm work i tested it and work
but not for open-E
please note that open-E work directly from the ISO as a read only
when i choose to install it give the error
so i believe it's install only problem

[To-M]

I have had installations work w/ KVM's in the past but not all are the same.

Do you get anything after POST are you seeing the option to select Software Installer - if so then hit the tab key and add "nousb2" then hit enter and see if that kicks it off without error.