Visit Open-E website
Results 1 to 2 of 2

Thread: Installation Problem

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Installation Problem

    I am currently trying this software for a Hyper-V Cluster system I am currently building. Its an 8 core opteron on a supermicro board with 20 15k RPM sas drives. My problem is that I've tried to install it with a CD and USB drive. I hit enter on "run software installer" and it just simply goes to a black screen after you see the USB/CD drive operate a little. I turned off silent mode to see whats happening. It extracts 2 files and at the end of the second file it says "ready!" and then black screen and nothing.. I waited for 10 minutes to see if it would show anything but it hasn't. If I simply run 64 bit system or 32 bit system it starts flawlessly and works great. I really want to get this installed so if anyone could help me it would be great. I am currently looking at the 8 TB installation.

  2. #2

    Default

    Sorry I figured out it.. I had to go and modify the kernals.cfg file to boot the installering using the 64 bit boot options instead of the 32bit.. Now I'm good to go =)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •