Visit Open-E website
Results 1 to 10 of 17

Thread: ESX4 Storage Motion

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2006
    Posts
    202

    Default

    if i reboot the sever then it works for a while then errors again

  2. #2
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    How much RAM in the machine ?

  3. #3
    Join Date
    Oct 2006
    Posts
    202

    Default

    16GB Memory, it works ok with iscsi but FC seems to cause the problem

  4. #4
    Join Date
    Oct 2006
    Posts
    202

    Default

    It also causes the admin gui to dropout

  5. #5
    Join Date
    Oct 2006
    Posts
    202

    Default

    The ESX server error reports "a general system error occured: Source detected that the destination failed to resume"

  6. #6
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    check the raw disk speeds in the test.log file from the log package in DSS.
    Some performance tweaks may be needed. specifically around caching.

    Also check the firmware on the FC card to make sure its current, as well as proper slot for the speeds.

  7. #7
    Join Date
    Oct 2006
    Posts
    202

    Default

    Hi I have downloaded the logs looked at them but it means nothing to me to be honest

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •