Visit Open-E website
Results 1 to 10 of 16

Thread: ESX4 losing Disk Connectivity to FC Volume

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2006
    Posts
    202

    Default

    We have changed the Fibre Channel Volume to WT when assigning it to a FC Group in DSS, that has stop the disconnect errors in vmware but has shown a perfromance decrease but we think that is down to the raid card that we will be replacing. Fingers crossed. Let me know how you get on if you try this.

    Thanks Gavin

  2. #2
    Join Date
    Oct 2006
    Posts
    202

    Default

    Well I think it is finally resolved, we swapped the HP and Dell raid card with an LSI Megaraid 9620-8i and set the settings as per open-e performance document for LSI and even with WT unchecked on the Volume we are getting no errors and very good performance.

  3. #3
    Join Date
    Oct 2006
    Posts
    202

    Default

    Unfortunatley we are still experiencing the problems, wider if we need to upgrade to 8GB fibre, anyone else had this issue

  4. #4
    Join Date
    Oct 2006
    Posts
    202

    Default

    I have found this article and it seems that there may be an issue with vmware ESX4 and storage servers not just open-e. http://communities.vmware.com/thread/228916

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •