Visit Open-E website
Results 1 to 3 of 3

Thread: UPS Slave mode don't work

  1. Angry UPS Slave mode don't work

    I'm using a MGE Ups with SNMP card and I can't put it working with OPEN-e

    My UPS have ip 10.100.1.32 and OPEN-E is 10.100.1.35.

    I went to SETUP -> hardware -> Function: UPS settings. and entered the following information:

    Use UPS - Yes
    MGE

    UPS MODE: Slave
    Username : mge username
    Password : mge password
    MASTER IP: 10.100.1.32
    TIMEOUT: 5 Min
    SNMP HOST AGENT DOMAIN: 10.100.1.32

    Restarted OPEN-E and went to MGE UPS Web administration and sent a test snmp to shutdown the OPEN-E but it dont work.

    Also I can't see OPEN-E on the notified applications of MGE UPS.

    Can someone help me?
    Thanks

  2. #2

    Default

    Try with different UPS models like the Pulsar SNMP or Pulsar / comet / SNMP or UM-Link SNMP.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  3. #3

    Default

    Quote Originally Posted by jrocha@netspace.pt
    I'm using a MGE Ups with SNMP card and I can't put it working with OPEN-e

    My UPS have ip 10.100.1.32 and OPEN-E is 10.100.1.35.

    I went to SETUP -> hardware -> Function: UPS settings. and entered the following information:

    Use UPS - Yes
    MGE

    UPS MODE: Slave
    Username : mge username
    Password : mge password
    MASTER IP: 10.100.1.32
    TIMEOUT: 5 Min
    SNMP HOST AGENT DOMAIN: 10.100.1.32

    Restarted OPEN-E and went to MGE UPS Web administration and sent a test snmp to shutdown the OPEN-E but it dont work.

    Also I can't see OPEN-E on the notified applications of MGE UPS.

    Can someone help me?
    Thanks
    Which DSS build do you have?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •