DSS to DSS6 upgrade

[To-M]

Did you save your settings from the DSS V5 - try going in the GUI in the DSS V5 in Maint. > Misc. and take all options to download the settings.cnf file then boot the DSS V6 and upload the settings.cnf then restart the DSS V6.

[Stevel]

Did you save your settings from the DSS V5 - try going in the GUI in the DSS V5 in Maint. > Misc. and take all options to download the settings.cnf file then boot the DSS V6 and upload the settings.cnf then restart the DSS V6.

Thanks for the quick reply, I went into Maintenance/Misc. and checked both setup and configuration and download it to my PC, this is what I resored to my DSS6.

Steve

[To-M]

So when you did the restore from the settings.cnf and rebooted the DSS V6 are you able see all the shares and targets?

[Stevel]

Unfortunately not, that's my problem. I didn't type in my license key I just left it in "demo mode" could that be my problem ?

Thanks !

[To-M]

Key is not the issue, try to go to the NAS Resources and click on the Specify path to add your share and see if it comes available and for the Targets create a new one and see if you can access it.

[Stevel]

I was worried to do this, will this affect the existing data ?

[To-M]

Not at all, the data is fine.