Visit Open-E website
Results 1 to 8 of 8

Thread: No system volume found.

  1. #1

    Question No system volume found.

    You are here:CONFIGURATION > NAS settings

    Warning
    No system volume found.

    How to create system Volume?

  2. #2

    Default

    Hi,

    create new Volume Group or if you already did it, try via console CTRL+ALT+X and "Select default Volume Group".

    Ja-B

  3. #3

    Question

    What is the purpose of System Volume? What kind of Volume Group, should I mark as System Volume, mean data volume group or create a separate small volume group for System Volume?

  4. #4
    Join Date
    Aug 2010
    Posts
    404

    Default

    Please find the following KB that could help you:
    http://kb.open-e.com/Default-Volume-Group_136.html

  5. #5

    Default

    I have a LSI Logic / Symbios Logic MegaRAID SAS 8208ELP/8208ELP. at the moment when I run open-e it doesnt show my volume. do I need to run H/W raid first through the LSI bios? or should I be able to see my volume through the GUI?

  6. #6
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    Was this volume created by DSS originally ?

  7. #7

    Default

    Yes, when I go into my LSI logic megaRAID controller I can see my 4 2TB drives. they were made a RAID0 array, virtual disk 0. the system BIOS sees my Seagate 250GB drive on the built-in SATA controller which I'm using to hold open-e.

    The Open-e software should be able to see the 7.6TB RAID0 array on the LSI Logic MegaRAID controller, no? It canít. Not on any of the three systems I am currently using open-e on.

  8. #8
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    Can you provide me with the system logs from the DSS?
    Perhaps upload them someplace, and send me the link in Private message.

    The reason is, I want to check the drivers being loaded.
    This particular SAS card doesnt have core support for our flavor of Linux.
    Although, I do have a build I want you to try with some new drivers from LSI, to see if it helps.
    Contact me via PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •