Errors from Kernel

[ForestQ]

I'm disabled USB and the COM ports in the BIOS, at the Boot options - system parameters disabled all but the SMP.

2011/06/22 17:59:59     kernel:[  648.040035] Pid: 0, comm: swapper Not tainted 2.6.27.39-oe64-00000-g5ec1914 #49

2011/06/22 17:59:59     kernel:[  648.040037] 

2011/06/22 17:59:59     kernel:[  648.040037] Call Trace:

2011/06/22 17:59:59     kernel:[  648.040039]  <IRQ>  [<ffffffff80234f6d>] warn_slowpath+0xcd/0x110

2011/06/22 17:59:59     kernel:[  648.040045]  [<ffffffff8022af87>] source_load+0x37/0x70

2011/06/22 17:59:59     kernel:[  648.040049]  [<ffffffff8041cd39>] __next_cpu+0x19/0x30

2011/06/22 17:59:59     kernel:[  648.040051]  [<ffffffff8022ca4a>] find_busiest_group+0x19a/0x850

2011/06/22 17:59:59     kernel:[  648.040054]  [<ffffffff8022bc5d>] place_entity+0xad/0xe0

2011/06/22 17:59:59     kernel:[  648.040056]  [<ffffffff8022bc5d>] place_entity+0xad/0xe0

2011/06/22 17:59:59     kernel:[  648.040058]  [<ffffffff8022e4fc>] enqueue_task_fair+0xfc/0x120

2011/06/22 17:59:59     kernel:[  648.040060]  [<ffffffff8022ad23>] enqueue_task+0x13/0x30

2011/06/22 17:59:59     kernel:[  648.040062]  [<ffffffff8022add8>] activate_task+0x28/0x40

2011/06/22 17:59:59     kernel:[  648.040065]  [<ffffffff8022e795>] try_to_wake_up+0xe5/0x190

2011/06/22 17:59:59     kernel:[  648.040068]  [<ffffffff8024fe98>] getnstimeofday+0x48/0xe0

2011/06/22 17:59:59     kernel:[  648.040071]  [<ffffffff802120f9>] read_tsc+0x9/0x20

2011/06/22 17:59:59     kernel:[  648.040073]  [<ffffffff8024fe98>] getnstimeofday+0x48/0xe0

2011/06/22 17:59:59     kernel:[  648.040075]  [<ffffffff804225ae>] strlcpy+0x4e/0x80

2011/06/22 17:59:59     kernel:[  648.040078]  [<ffffffff805f7c53>] dev_watchdog+0x203/0x210

2011/06/22 17:59:59     kernel:[  648.040080]  [<ffffffff802120f9>] read_tsc+0x9/0x20

2011/06/22 17:59:59     kernel:[  648.040083]  [<ffffffff8024fe98>] getnstimeofday+0x48/0xe0

2011/06/22 17:59:59     kernel:[  648.040085]  [<ffffffff805f7a50>] dev_watchdog+0x0/0x210

2011/06/22 17:59:59     kernel:[  648.040088]  [<ffffffff8023e92f>] run_timer_softirq+0x15f/0x1c0

2011/06/22 17:59:59     kernel:[  648.040091]  [<ffffffff8023a2d3>] __do_softirq+0x73/0xf0

2011/06/22 17:59:59     kernel:[  648.040093]  [<ffffffff8020d41c>] call_softirq+0x1c/0x30

2011/06/22 17:59:59     kernel:[  648.040095]  [<ffffffff8020ec35>] do_softirq+0x35/0x70

2011/06/22 17:59:59     kernel:[  648.040097]  [<ffffffff8023a259>] irq_exit+0x89/0x90

2011/06/22 17:59:59     kernel:[  648.040101]  [<ffffffff8021b7c0>] smp_apic_timer_interrupt+0x80/0xc0

2011/06/22 17:59:59     kernel:[  648.040103]  [<ffffffff8020cef6>] apic_timer_interrupt+0x66/0x70

2011/06/22 17:59:59     kernel:[  648.040105]  <EOI>  [<ffffffff8021b3f0>] lapic_next_event+0x0/0x10

2011/06/22 17:59:59     kernel:[  648.040109]  [<ffffffff80212e51>] mwait_idle+0x41/0x50

2011/06/22 17:59:59     kernel:[  648.040111]  [<ffffffff8020ad74>] cpu_idle+0x44/0x70

2011/06/22 17:59:59     kernel:[  648.040112]

[To-M]

This typically means some issue with hardware. Was this NIC working in the past with no issues?

Is this a new NIC that was just added?

Do you have other hardware?

If this is an onboard NIC from the motherboard perhaps updating the Firmware of the motherboard.

It could also be that the NIC is faulty and might need to be replaced.


dev_watchdog+0x0/0x210
run_timer_softirq+0x15f/0x1c0
o_softirq+0x73/0xf0
do_softirq+0x35/0x70
irq_exit+0x89/0x90

[Al-S]

What kind of NIC cards do you have?
also what is your RAID Controller model?
Did you add any new hardware to the system? was it work fine before, or this is your first time trying the system and face this issue?

Did you tried an older build of DSS, and find out if it works fine with you or give you the same result?

Try if you can to change your cards slots, I mean if you can put your RAID Card in another slot, and the NIC card(s) to another slot(S).

[ForestQ]

1. Tyan Toledo i3210W S5211 (S5211G2NR) Bios 1.04. The site contains the version 1.09. I will be updated.
2. Raid Areca ARC-1280ML The latest firmware.

Use the license DSS 16TB on a flash drive, on which everything works fine.
I want to switch to new software and V6 with such problems. I'll be updating the BIOS on the motherboard and write about the results.

[ForestQ]

Updated bios on the motherboard.
The errors that I wrote above, arose when writing files over a network. And when they appear in the admin panel, upload broke off.
Now, after updating the firmware of the motherboard, pumping breaks, but errors in the administration interface does not.

When loaded in the old system of DSS and it all works fine.

[ForestQ]

Logs from V6 http://www.megaupload.com/?d=FP32CIVV

[Al-S]

Can you send us a presale email, so I can send you a small update for your NIC cards as you are using build up75, the SU names are:
0852-DSS_V6_up75-Intel_1Gbps_NIC_driver_set
0853-DSS_V6_up75-Intel_10Gbps_NIC_driver_set

[ForestQ]

Check your private messages please.