Visit Open-E website
Results 1 to 10 of 12

Thread: Errors from Kernel

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    1. Tyan Toledo i3210W S5211 (S5211G2NR) Bios 1.04. The site contains the version 1.09. I will be updated.
    2. Raid Areca ARC-1280ML The latest firmware.

    Use the license DSS 16TB on a flash drive, on which everything works fine.
    I want to switch to new software and V6 with such problems. I'll be updating the BIOS on the motherboard and write about the results.

  2. #2

    Default

    Updated bios on the motherboard.
    The errors that I wrote above, arose when writing files over a network. And when they appear in the admin panel, upload broke off.
    Now, after updating the firmware of the motherboard, pumping breaks, but errors in the administration interface does not.

    When loaded in the old system of DSS and it all works fine.

  3. #3

  4. #4
    Join Date
    Aug 2010
    Posts
    404

    Default

    Can you send us a presale email, so I can send you a small update for your NIC cards as you are using build up75, the SU names are:
    0852-DSS_V6_up75-Intel_1Gbps_NIC_driver_set
    0853-DSS_V6_up75-Intel_10Gbps_NIC_driver_set

  5. #5

    Default

    Check your private messages please.

  6. #6
    Join Date
    Aug 2010
    Posts
    404

    Default

    Quote Originally Posted by ForestQ
    Check your private messages please.
    Thank you, you should receive an E-mail from our Pre-Sales team.

  7. #7
    Join Date
    Aug 2010
    Posts
    404

    Default

    As an update to this post, the small updates (drivers )
    0852-DSS_V6_up75-Intel_1Gbps_NIC_driver_set
    0853-DSS_V6_up75-Intel_10Gbps_NIC_driver_set

    Are already included with our newer builds ( builds after up75 ). So if you already running a build after up75, then no need to the small updates.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •