Have an IBM x346 w/2-2.8ghz DC, w/8gb ram, 6-142gb u320 drives using raid5 w/serveraid 7k controller. Have created 2 logical drives, one on 12gb, the other w/rest of the disk.

1) Sections of the manual say that the software must reside on the non-data portion of a disk. The installer displayed the following and requested the boot location. Is this config correct or must I move the "LINUX" and "SWAP" to sda?

/dev/sda 12582mb Logical 0 Bootable
/dev/sda1 1998mb W95 Fat16

/dev/sdb 721488mb Logical 1
/dev/sdb1 8787mb Linux
/dev/sdb2 1077mb Swap

2) I ran w/this config and loaded the installer, rebooted, loaded the 64bit software, and rebooted. Accessed the NAS from another PC, logged in and, nothing. The license text displays and has 2 buttons w/no text. I clicked the left one. The next screen displays lots of pictures but no buttons except logoff. A big blank box is on the bottom left of the screen. Cannot even get to square 1 to see what was even created.

I'm at a loss. Any help appreciated...CJ