Upgrade hangs at 90%

[dljordaneku]

I just upgraded one of my boxes to 2011-08-18 6.0 up80 build5626 and on reboot, it is hanging at 90%. I haven't touched it yet just giving it some time to see if it will work itself out. But I wanted to post on here to see if this is a known issue or what.

Thanks

dj

[dljordaneku]

Never mind. It finally came up.

dj

[Al-S]

Glad to hear that it works fine with you.

In general, if you are running the system from a DOM/USB flash memory then check the DOM/USB health and you may need to move it to a system with a Windows OS, and do chkdsk for the DOM/USB.

If you are running the system from your storage( installed DSSv6 on HDD) then you may need to check the File System health by using File System Repair tool from your Console Mode.

Also you need to check that you already update your RAID Controller firmware to the latest version, and that you already have the latest build of DSSv6.