System not booting

[To-M]

At this point where the system is not able to boot from boot-loader then contact Germany if in UK (+49 (89) 800 777 - 16) or USA (770-881-7680) to recieve a replacement. Now you can still try the ISO update from CD.

[UniToV]

Thank you again for the support.
We are now going to update the OS to version 1.89, and then proceed to restore the share setting through the Resources tab and in Function create new share (unchecking the box).
We will let you know...

[To-M]

If unsuccessful contact support at support@open-e.com

[UniToV]

Quick as Death himself!

We flashed and all went well, BUT the system still hangs in the boot (not even reaching the (please wait) phase).
This time we do have the NAS-RESCUE_MODE option. We dashed onto it, BUT we get:

crc error

--system halted.

ouch!
Shall we proceed to support?

Best regards,
UniToV

[To-M]

This could be a Memory issue, try resetting the RAM or swapping out with new ones. This could be the DOM or a Memory issue (try using a memory check).

[UniToV]

We checked the memory several times and all was OK.
But we are stubborn and decided to redo the flashing and restart again.
This time the SO loaded!!
So at least we are on-line again...

BUT we have "No share volume !!! (lv00)" on our Resource tab and no Function button.

We see the unit, but no volume group in the system, as we feared...
If we try to add it to the NAS its content will be erased, isn't it?
So... there is no exit? Our data are gone for good??

Waiting for any info,
UniToV

[To-M]

To gain access to your shares - go to the Resources tab and in Function create new share - uncheck the box "Create default path" there you can see your shares again, then create them.